Double Glazing Window Repair
Over time, double glazing could develop problems. For instance, it may become difficult to open the windows or have a door that snags. These issues are easily solved.
Many homeowners will attempt to fix these issues on their own but this should be left to the experts. It is dangerous to attempt to fix these issues without the right tools and information.
Broken Panes
A damaged or broken window can be a gruelling and a hassle. It could let cold or hot air into your home and create a gap that allows in debris or moisture. It can also lower the efficiency of your energy, since your AC and furnace must work harder to keep your home warm. You might be able depending on the weather conditions and whether your windows are double-paned or single-paned to repair the damage temporarily using silicone sealant. However the final solution will require expert assistance.
A damaged window can be fixed using strong-duty tape. A piece of tape can be placed over the crack to stop it from becoming worse. A crack that extends into the glass or is too big to be covered by tape will need to be replaced completely.
The excitement of a pet when you open the door can cause broken glass. It can also occur naturally when the frames of your windows move slowly over time and break the special packaging material that keeps the glass sheets in place.
If you've broken a glass pane, wear heavy gloves and place a cardboard box near to catch the shards. Take the sash off and work on an even surface, such as a table. Wear a mask to ensure not to inhale the glass fragments.
Once the old glass has been removed, clean any varnish or paint from the frame of the window. You can also use a heat gun to soften any old glazing putty or metal glazing points that kept the glass in the first place.
Then, double glazing repair Edgware can measure the opening of the new glass. To allow for expansion and contracting it is recommended to purchase a replacement glass that is slightly smaller than the opening. You can have your local hardware store or your home center cut it to these measurements.
Press the new glass into the frame. If there are gaps, you can fill them with silicone caulk, which you can purchase at a home improvement store. Then smooth the caulk using a putty knife. Add glazier's points to the edges of the glass frame every six inches, to ensure that they hold the pane securely in the right place.
Condensation
Condensation can happen on double-glazed windows, whether they are old or brand new. This is especially true in winter when colder air meets warm glass. It could be a problem but it's not typically an issue. This is because condensation on windows indicates that your double glazing is functioning properly.
It can be an indication that your seal is failing and moisture is leaking through the gap. If you notice a milky look on your window, or if you notice that water beads appear on its surface, this issue needs to be addressed in order to stop mould, mildew or any further damage.
Luckily condensation can be eliminated quickly. A technician will drill small holes into the frame of the window to let the moisture trapped to escape. This process is referred to as defogging. It can also aid in removing any stains that are caused by the trapped moisture.
The defrogging process does not solve the underlying issue of a faulty window seal. In fact, it may not do so even in the event that the condensation is gone, since the damaged air that was in between the panes remains. This could mean that you are not getting as much heat insulation as you would like from your windows.
If you have noticed moisture growing in your windows, it's recommended to speak with an expert as soon as possible to see what the next steps should be. They may recommend a solution such as adding vents to windows to let fresh air in but don't allow warm air to escape.
It is the last thing you'll need for your double-glazing to go down. This is especially true when it could be expensive to replace. With the right skills, knowledge and equipment, it's possible to repair your double glazing and keep it in good condition for years to come. If you need a double glazing repair contact us today to find out what we can do to help. We provide a wide range of services including replacing one or more panes of glass to installing energy-efficient upgrades.
Leaks
A leak is a big issue because it means there is a possibility of damp ingress that can cause damage. It's expensive to fix, and it's usually a sign that your property has other problems such as mould or dry rot. This is why it's crucial to address a leak as soon as possible.
If you feel an air draught emanating from your double glazed windows, it's likely that the seal within the sealed unit has been damaged. This could also indicate that the argon gas used to insulate the glass panes has been removed. A professional technician can reseal your window to fix this problem.
Sometimes, dirt may cause double-glazed windows to be cloudy or misty. This usually means that the seal is deteriorating and the glass needs to be cleaned. A specialist can accomplish this by using high-pressure water jets that quickly clean the glass.
If condensation develops between the two panes in your double glazing, it is an indication that the seal is leaky and there isn't any argon remaining between the glass. This is a serious problem and indicates that your double glazing is not insulating your home as it should. The glass can be replaced, but you'll have to do it sooner rather than later, as the performance of your double-glazed window has been affected.
If you have brand new double-glazed windows under guarantee, you should contact the company that installed them and report any problems with the units or the sealing of the glass, as it is unlikely to be covered under the warranty. If you attempt to play with the units or attempt to make any repairs yourself then this will invalidate your guarantee, so it is best to leave these repairs to the professionals. This is the reason we suggest that you use a specialist double glazing repair company.
Weather Damage
In areas of extreme weather conditions, double-glazed windows require a strong frame that can hold the glass panes. Ice, snow, high wind and violent thunderstorms can damage your windows. Contact a professional for repairs to double glazing if you spot cracks, dents or holes.
If you notice that water is flowing out of the bottom of the window, it may be a sign that the seal inside is cracked and allows water into your home. Your uPVC window frame or aluminum window frames may also be bent or warped. You will need to replace your window seal and put it back inside the frame to fix this.
Window seals ensure that double-glazed windows are airtight. keep heat from entering your home and prevent condensation between the glass panes. Window seals are typically constructed of uPVC or aluminum and keep the glass in place. When the window seals fail, you could experience problems such as the loss of energy, draughts or windows that have mist.
Misting windows are a frequent problem and is due to the gas used to insulate the double-glazed window breaking. The argon gas keeps the glass in place and makes an airtight seal. However if the seal is damaged or worn out, it could allow the gases to escape. The argon gas can cause condensation between the glass panes when it escapes.
The issue can be solved by replacing the window seal, inserting the glass, and then applying an anti-fogging agent to prevent condensation from occurring in the future. The best way to accomplish this is to contact an expert to do the work for you.
Double-glazed windows are important but they can also be damaged and need to be repaired. The majority of windows can be repaired without the need to replace them. To accomplish this, it is an ideal idea to have a few basic tools on hand. You'll need protective gloves and a tape measure, scotch tape or transparent film and nail polish, and a sheet of plastic that is cut to size.